MagnaPower 862 frame, 4 pole synchronous AC generator - 862FSH86174-HI

Part#: 862FSH86174-HI

Catalog#: 862FSH86174

Compare Product

Key Features

Ideal for distributed power, utility applications, oil and gas, data centers, cogeneration, reciprocating and turbine prime movers
Single-piece lamination and amortisseur windings, rather than segmented laminations, to minimize internally generated shaft currents
Copper field is wet-layer wound with thermo-setting epoxy for high mechanical and electrical integrity. An overcoat of tropical insulation provides added environmental protection.
Form-wound coils provide excellent voltage surge and corona protection.
Conduit box assemblies are optimized to the application. Lead entry or terminal connection requirements are designed to accept various auxiliary devices such as current transformers all within a compact envelope.
Permanent Magnet Generator supplies the regulator with input power that is isolated from load disturbances
300% short circuit current for a minimum of 10 seconds during fault conditions
Patented Digital Voltage Regulator, the DVR2400, provides .25% voltage regulation, three phase RMS sensing, and advanced operation and protection features
Heavy-duty, regreasable, double-shielded, ball bearings (40,000 hour B-10 life)
UL Recognized (600V max) per Standards UL 1004-1, -5; CSA Certified (13,800V max) per Standard C22.2 No. 100

Specifications

Frequency	Frequency: 60 Hz	Terminations	Terminations: Leads w/ 4 bus bars
Speed	Speed: 1800 r/min	Leads	Leads: 6
Phase	Phase: Three	Regulator	Regulator: DVR2400
Insulation	Insulation: Class F	Winding	Winding: Form Wound
PMG	PMG: Standard	Bearing	Bearing: Single, Double, Close-Coupled

Efficiency

Information not available at the moment. Please check back later!